
Thermal paper, as the name suggests, is a kind of paper that is sensitive to temperature. That is because the surface of the thermal paper is coated with a layer of chemicals, so that when it reaches a certain temperature, the color change will occur, and this change once formed will not be able to recover. And the distribution of the thermal layer is not uniform, which will lead to the presentation of different shades of the picture. The chemical formula of the thermal coating is unreasonable, which will lead to the shortening of the storage time of the thermal paper. So a high-quality thermal paper is how to make it, the next article will tell you in detail.
Thermal coating is the core raw material for making thermal paper, whether it is direct thermal paper or indirect thermal paper. Thermal coating raw materials contain colorless dyes, most commonly fluorescent compounds, color developers, sensitizers, fillers (commonly calcium carbonate), adhesives, stabilizers, lubricants and so on. The combination of these raw materials enables the heat-sensitive coating to change color or other properties when subjected to heat, and is thus widely used in a variety of situations with varying conditions.
Thermal paper coating process is generally divided into two ways: upper and lower once coated or two layers of thermal coating coated at the same time. Because simultaneous coating is more efficient, most of them choose the latter nowadays. The coating machine usually consists of a coating head and a coating roll, which evenly coats the thermal raw material onto the paper surface, ensuring that there are no streaks or lumps on the surface. Here are a few important aspects to note when the coating process is underway:
Thickness at the time of coating is one of the most important indicators of coating quality. We generally measure it through a coating gauge or observe the coating slices through a microscope to determine whether the coating thickness meets the requirements, so as to ensure the quality of the distribution of the thermal material and subsequently achieve the desired color rendering capability.
With the thickness of the need to pay attention to the same time there is the uniformity of the coating, we also through the coating uniformity detector for testing, or through visual inspection to determine whether the distribution of coating is uniform to ensure that the sensitivity of the thermal paper in different parts of the sensitivity is the same, to avoid the situation of uneven color development.
Generally speaking, too high a coating temperature will result in an uneven surface coating, which will lead to paper wrinkles; too low a temperature will result in a weak coating on the surface of the paper, which will be easily peeled off. Therefore, the coating temperature is generally stabilized between 20°C and 25°C.
The factors affected by improper coating speed are similar to those of coating temperature. Too fast a speed will lead to uneven distribution of the coating, while too slow a speed will also lead to a weak coating. Therefore, the coating speed should generally be between 80-120m/min.
Once the coating process is complete, the next step to take is to dry and set the coating. This is because the thermal coating contains moisture, and if it is not dried, it will not be able to ensure its ability to develop and stabilize the color during thermal printing. This can be done through different methods. For example, hot air drying, infrared drying or UV curing, depending on the capabilities of the machine and the formulation of the coating. Follow the recommended drying or curing parameters (temperature and time) to achieve optimum coating adhesion and stability.
Thermal paper usually consists of a paper base, a thermal coating, and a protective layer. Therefore, after coating and drying to finalize the paper, we usually have to apply another protective layer, which is applied and dried in a similar way as the thermal coating. The protective layer improves the durability of the thermal paper because it absorbs some of the light that causes the chemical reaction of the thermal coating and greatly extends the shelf life of the thermal paper after printing.
After completing the production process of thermal paper, we need to process the finished thermal paper in different ways according to different needs. For one thing, we will use die-cutting, jacking, embossing and other methods to process the thermal paper according to the required size and shape. The quality of processing and molding also has a great impact on the use of thermal paper. Secondly, we will cut the large rolls of thermal paper into narrow widths and roll them into rolls by automatic or semi-automatic way, in this process, we should pay attention to control the tightness of the rolls to ensure the flatness of the thermal paper.
Moderpaper is a manufacturer for thermal paper and thermal label from china,You can contact us 24/7